Asphalt Cost Calculator
Estimate the material cost of an asphalt job — driveway, lot or path. Enter the area, the compacted thickness and your local price per ton, and the calculator returns the total asphalt cost along with the cost per square foot.
How it works
Tons = length × width × (thickness ÷ 12) × 145 lb/ft³ ÷ 2,000, plus waste. Material cost = tons × your price per ton. Hot mix asphalt commonly runs about $100–$150 per ton at the plant; the cost per square foot shown is material only, before laydown and base.
Frequently asked questions
How much does asphalt cost per ton?
Hot mix asphalt commonly runs about $100–$150 per ton at the plant, moving with oil prices and mix type. Enter your local quote for an accurate figure.
How much does asphalt cost per square foot?
Material alone is often about $1–$2.50 per square foot at 2–3 in thick; installed driveways run $3–$7 per sq ft once base, laydown and compaction are added. This page shows material cost — use the driveway cost calculator for installed price.
Is this the installed price?
No — this is the asphalt material cost by the ton. Installation adds grading, a gravel base, machine laydown and compaction. Use the asphalt driveway cost calculator for an all-in installed estimate.
Related calculators
All asphalt calculators
Estimates are for planning only. Material yields, densities and code requirements vary — confirm quantities with your supplier and local building code before ordering.