Asphalt Driveway Cost Calculator
Estimate what an asphalt driveway will cost. Enter the length and width and an installed price per square foot — the calculator returns the total installed cost, then cross-checks it with the tons of asphalt and the material-only cost so you can sanity-check a contractor quote.
How it works
Installed cost = area (sq ft) × your price per square foot — most residential asphalt driveways run about $3–$7 per sq ft installed. For a cross-check, tons = length × width × (thickness ÷ 12) × 145 ÷ 2,000, and material cost = tons × your price per ton.
Frequently asked questions
How much does an asphalt driveway cost?
Most residential asphalt driveways run about $3–$7 per square foot installed, so a 40 × 12 ft (480 sq ft) driveway is roughly $1,400–$3,400. Price depends on thickness, base prep, tear-out and local asphalt prices.
Is asphalt cheaper than a concrete driveway?
Asphalt is usually cheaper to install than concrete per square foot, but has a shorter life and needs periodic sealing. Compare the material quantity on our concrete driveway calculator if you are weighing both.
What goes into the installed price?
Grading and a compacted gravel base, the hot mix asphalt itself, machine laydown and compaction, plus edge work and haul-off of any old surface. Thicker asphalt and more base prep push the per-foot price up.
Related calculators
All asphalt calculators
Estimates are for planning only. Material yields, densities and code requirements vary — confirm quantities with your supplier and local building code before ordering.